Difference between revisions of "Preparing NanoPI M1 Plus"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | + | == Preparing NanoPI M1 Plus for Eywa == | |
| + | |||
| + | = Step 1 - Flash card = | ||
| + | |||
| + | Download nanopi-m1-plus_sd_debian-jessie_4.14_armhf_20181119.img from FriendlyElec shared folder. | ||
| + | |||
| + | Then, flash an SD card (we used Toshiba 16Gb) with balena Etcher (or equivalent). | ||
| + | |||
| + | The username/password of the system is root / fa . | ||
| + | |||
| + | = Step 2 - Remove the unwanted packages = | ||
| + | |||
| + | apt-get --yes --force-yes remove --auto-remove --purge network-manager x11-common x11-proto* | ||
| + | |||
| + | Before rebooting the system, you must configure /etc/network/interfaces with the following: | ||
| + | |||
| + | auto lo | ||
| + | iface lo inet loopback | ||
| + | |||
| + | auto eth0 | ||
| + | iface eth0 inet static | ||
| + | address 10.10.10.17 | ||
| + | netmask 255.255.255.0 | ||
| + | gateway 10.10.10.254 | ||
| + | |||
| + | NOTE: the eth0 is unconfigured by default. If you forget to configure it in the file and reboot, the board will be inaccessible by ssh. | ||
Revision as of 15:40, 19 April 2019
Preparing NanoPI M1 Plus for Eywa
Step 1 - Flash card
Download nanopi-m1-plus_sd_debian-jessie_4.14_armhf_20181119.img from FriendlyElec shared folder.
Then, flash an SD card (we used Toshiba 16Gb) with balena Etcher (or equivalent).
The username/password of the system is root / fa .
Step 2 - Remove the unwanted packages
apt-get --yes --force-yes remove --auto-remove --purge network-manager x11-common x11-proto*
Before rebooting the system, you must configure /etc/network/interfaces with the following:
auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.17 netmask 255.255.255.0 gateway 10.10.10.254
NOTE: the eth0 is unconfigured by default. If you forget to configure it in the file and reboot, the board will be inaccessible by ssh.
